Auto Scale Cooldowns
Cooldowns enforce a period of time between possible actions. Auto Scale has the following types of cooldowns:
- Group Cooldowns
- Policy Cooldowns
Note: Cooldowns are mainly relevant to event-based scaling policies because those policies are triggered by events that could occur before a required minimum cooldown period ends. However, a schedule-based policy will not override a cooldown and will not run during a cooldown period.
Use a group cooldown
When you set a group Minimum Cooldown, you are restricting the ability of the group to change in response to a policy. If you have configured event-based policies, an event, or multiple events, to scale up or scale down could happen before enough time has elapsed for the servers to fully deploy, in the case of a scale-up; or for all transactions to finish, in the case of a scale-down. A group cooldown ensures that at least a minimum amount of time passes before a scale-up or scale-down triggered by an event-based policy, can occur.
For example, if you have three separate monitoring alerts for a server and each alert is configured with a webhook to your Auto Scale group to trigger a scale-up event if the alarm state goes critical, in the event of all three monitoring alerts going critical at the same time, there could be three separate but near-simultaneous requests to scale up. Having a minimum cooldown of 30 minutes would allow only one of the scale-up events to occur within 30 minutes–the other two alerts would not be acted upon and do not iterate.
This feature is mostly used to ensure that servers being added in a scale-up have enough time to fully deploy. The required minimum cooldown is not about how many servers you may add at once - all servers are added at the same time. It is about the complexity of the servers that you are adding. If the servers that you add are very complex, they need a longer minimum cooldown period in order to fully deploy. You should set the group minimum cooldown to the length of time that it takes for one server to fully deploy.
Use a policy cooldown
When you set a policy Cooldown, you are restricting the executability of the policy by requiring a period of time to pass before the policy can be executed again - even if it is triggered by an event. A policy cooldown controls how often a single, specific, policy can be executed. For example, a scale-up policy cooldown restricts how often the scale-up is executed despite being triggered by an event, which allows scale-ups to fully deploy before another scale-up can occur. Conversely, a scale-down policy cooldown can allow for the graceful removal of servers by restricting the removal of too many servers at once even if multiple scale-downs are rapidly triggered. Policy cooldowns allow you to scale up fast and scale down slowly.
The following graphs illustrate how cooldowns affect policy execution:
©2020 Rackspace US, Inc.
Except where otherwise noted, content on this site is licensed under a Creative Commons Attribution-NonCommercial-NoDerivs 3.0 Unported License